MX-5 Silicone Coolant & Breather Hoses – NA

Looking for a complete, high quality, ultra durable, long lasting and high temperature resistant silicone hoses set for your Mazda MX-5 NA (Mk1) engine? We got you covered!

This complete silicone coolant and breather hose kit consists of 15 hoses (for 1.6 engine) or 14 (for 1.8 engine) hoses. It’s available in multiple colours and with optional stainless hose clamps. Since the silicone hoses are more durable / thicker than the stock ones, using our hose clamps is advised.

The hoses are made out of 4.5 mm thick four ply silicone with three ply polyester reinforcing. They can withstand up to 7 bars of constant pressure (10 bars of burst pressure) and temperature from -50°C to 240°C. These hoses are manufactured to a high standard and with compliance to ISO9001:2000 & ISO TS16949 norms.

Set fits MX-5 NA (Mk1) 1.6 (B6-ZE) and 1.8 (BP-ZE) engines with manual gearbox, both left and right hand drive versions. Please select your engine version and colour prior to ordering.

List of included hoses for 1.6 (B6-ZE):

1. Upper radiator inlet hose
2. Lower radiator outlet to hard pipe hose
3. Lower radiator hard pipe to block hose
4. Heater matrix inlet hose
5. Heater matrix outlet hose
6. Inlet manifold to thermostat housing coolant hose
7. ISC to throttle body coolant hose
8. Throttle body coolant hose
9. Thermostat housing bypass hose
10. Radiator to expansion tank hose
11. Expansion tank overflow hose
12. Cam cover to intake pipe breather hose
13. PCV to inlet manifold hose
14. IACV breather hose
15. Intake pipe resonator hose

List of included hoses for 1.8 (B6-ZE):

1. Upper radiator inlet hose
2. Lower radiator outlet to hard pipe hose
3. Lower radiator hard pipe to block hose
4. Heater matrix inlet hose
5. Heater matrix outlet hose
6. Thermostat bypass hose
7. Thermostat housing to throttle body hose
8. Radiator to expansion tank hose
9. Expansion tank overflow hose
10. Cam cover to intake breather hose
11. PCV to inlet manifold breather hose
12. IACV breather hose
13. Oil cooler coolant hose
14. Oil cooler coolant return hose

If you have one of the earlier models with metal cam cover to intake breather pipe, you can unbolt the pipe and use the provided hose. Alternatively, you can modify the hose by measuring and cutting a piece from the middle and fit the two resulting shorter hoses onto the original metal pipe.

Fits MX-5 NA (Mk1) with 1.6 or 1.8 engines depending on your choice.

Shipping world-wide.