MX-5 Silicone Coolant & Breather Hoses – NB

Looking for a complete, high quality, ultra durable, long lasting and high temperature resistant silicone hoses set for your Mazda MX-5 NB (Mk2) engine? We got you covered!

This complete silicone coolant and breather hose kit consists of 10 hoses (for 1.6 engine) or 13 hoses (for 1.8 engine).

It’s available in multiple colours and with optional stainless hose clamps. Since the silicone hoses are more durable / thicker than the stock ones, using our hose clamps is advised.

The hoses are made out of 4.5 mm thick four ply silicone with three ply polyester reinforcing. They can withstand up to 7 bars of constant pressure (10 bars of burst pressure) and temperature from -50°C to 240°C. These hoses are manufactured to a high standard and with compliance to ISO9001:2000 & ISO TS16949 norms.

Set fits MX-5 NB (Mk2) 1.6 (B6-ZE) and 1.8 (BP-Z3) engines with manual gearbox, both left and right hand drive versions. Please select your engine version and colour prior to ordering.

List of included hoses for 1.6 (B6-ZE):

1. Upper radiator inlet hose
2. Lower radiator outlet hose
3. Heater matrix inlet hose
4. Heater matrix outlet hose
5. Thermostat bypass coolant hose
6. Throttle body to inlet manifold coolant hose
7. Thermostat housing to throttle body coolant hose
8. Radiator to expansion tank hose
9. PCV valve to inlet manifold breather
10. Cam cover to air intake breather

List of included hoses for 1.8 (BP-Z3):

1. Upper radiator inlet hose
2. Lower radiator outlet hose
3. Heater matrix inlet hose
4. Heater matrix outlet hose
5. Thermostat bypass coolant hose (MK2 only – use below for MK2.5)
6. Thermostat bypass coolant hose (MK2.5 only – use above for MK2)
7. Thermostat housing to throttle body coolant hose
8. Cam dover to air intake breather
9. PCV valve to inlet manifold breather (MK2 only – use below for MK2.5)
10. PCV valve to inlet manifold breather (MK2.5 only – use above for MK2)
11. Oil cooler inlet hose
12. Oil cooler outlet hose
13. Radiator to Expansion Tank Hose

Although the kit for 1.8 engine contains 13 hoses, you will only be using 11 for your specific car. NB (Mk2) compared to NBFL (Mk2.5) uses different thermostat and PCV valve hoses so the kit is equipped with all of the options you need for both versions.

Fits MX-5 NB (Mk2) and NBFL (Mk2.5) with 1.6 or 1.8 engines depending on your choice.

Shipping world-wide.