-
×
MX-5 Coolant Reroute Rubber Hose
1 × €32,00
-11%
MX-5 Performance Racing Engine Mounts
Original price was: €232,00.€207,00Current price is: €207,00.
Ultra-lightweight performance engine mount set with polyurethane bushings. Better gear shifts, improved engine mass control and instant throttle response. Powder coated for extra durability.
Quickly shifting gears on your NA or NB MX-5 Miata while driving fast can be a challenge. To miss the right gear in the middle of a slalom course is a bugger, or in the worst case of a “money shift”, a possible engine damage. Problem lies in the soft stock engine mounts that allow the engine block to tilt back and forth, resulting in the gear lever moving around. Fortunately, we have a solution that comes with other benefits as well!
These lightweight, yet durable performance engine mounts keep the stock engine height while using our own bespoke design compared to stock. With ideal 70A stiffness 50 mm polyurethane bushings they are more suited for performance street driving, track-days and racing applications. They offer vastly improved shifting experience, better mass control of the engine and more immediate throttle response without the drawbacks of solid mounts.
With over 30% weight saving over stock, these are a great choice for all driving enthusiasts. They will also last for the lifetime of the car, as compared to rubber bushing the polyurethane inserts will not harden and break over time. Proudly manufactured by us, including the polyurethane inserts. Surface is powder coated for durability.
Somewhat increased NVH (Noise, Vibration, Harshness) is to be expected, possibly causing interior trim rattle below 2000 rpm or at idle. This is probably not a concern for performance-oriented drivers, but might be a bit too much for some daily drivers, so we recommend this setup primarily for dedicated performance cars.
At the moment we offer two sets of engine mounts depending on engine mounting hole patterns (please check your engine prior to ordering).
Engine models:
– 1.8 engines without VVT (BP and some BP4W) using 3 mounting bolts on each side of the block
(usually found in NA and early NB; you can use 3 bolt mount on a 4 bolt block but not vice versa)
– 1.8 engines with VVT (BP ZE) using 4 mounting bolts on each side of the block (usually found in NB and NBFL)
– 1.6 liter engines (B6 with 3 bolts) (all variants which are in NA, NB and NBFL models)
Shipping world-wide.
| Weight | 3 kg |
|---|---|
| Dimensions | 30 × 20 × 20 cm |
| Engine model | 3-bolt version, 1.6l (NA, NB, NBFL), 3-bolt version, 1.8l (NA, early NB), 4-bolt version, 1.8l (NB, NBFL) |
2 reviews for MX-5 Performance Racing Engine Mounts
Add a review
You must be logged in to post a review.
Related products
-12%
€40,00 – €69,00
-11%
€52,00 – €66,00
€6,00
Lars Hultman –
These mounts are SOLID!
I ordered only the intake mount.
Not much difference in NVH when the car is at speed, crusing on the freeway is no differnt except maybe a slight increase in engine/drivetrain noise.
At lower speeds, there is slight more resonance and buzzing noises from interior pieces.
At idle though, holy cow, the car rattles and shakes to bits…
But the trade of is really good shifting.
Before I would miss especially third gear when on track, a lot.
Now it is always there when I need it!
I am thinking about adding the exhaust side mount as well, as the difference in shifting on track was that good!
Not recommended on a street car (obviously), but for a track car, these would be a no brainer in my opinion!
Alessandro Sfulcini (verified owner) –
Ho appena montato entrambi i supporti motore per la mia NB 1.6 e cavolo che differenza fanno.. le cambiate sono perfette e anche il più leggero tocco di gas si sente immediatamente, l’unica cosa ovviamente è che da ferma vibra fino a smontarsi, ma il rapporto qualità prezzo è incredibile, sembra di essere in una macchina da corsa con quattrocento cavalli anche se poi appena acceleri ti ricordi che è solo una mx5, in ogni caso è stato l’acquisto del secolo, lo rifarei altre mille volte.